Review of The Tetra Air Pump Kit

The Tetra Air Pump is a very popular device that gives oxygen to koi and the ponds they inhabit. It is designed to withstand harsh winter conditions and is the optimal solution when ponds reach freezing temperatures.

How Does The Tetra Air Pump Function?

The kit is comprised of a thirty foot air tube and porous objects that slowly distribute miniature bubbles to enhance the oxygen available in the water. After taking in the air, the pump will compress and then deliver it via the pump unit. The compressed air will be emitted by air stones which are positioned around the pond. The air pump is designed for ponds which have a maximum of five thousand gallons and can operate at flow rate of 100 GPH (gallons per hour).

Pond aeration is a necessity as it keeps the water clean and clear while improving the performance of the filter. This foments break down of substances which are toxic, while maintaining an ice opening when the surface of the water freezes over during winter. Tetra is a highly respected company that has been in operation since 1951 and since that time they’ve acquired an extensive knowledge of ponds and fish which is vastly beyond the scope of most of their rivals. The air pump is also energy efficient, and comes with a fifteen foot power cord and can operate at 120 volts.

What Are The Advantages Of Using The Tetra Air Pump?

The air pump distributes oxygen through the compression of external air and does so while making little noise. It can also function in ponds or tanks which have a maximum of five thousand gallons and does well during winter. The unit is both inconspicuous and compact, with a wonderful design that will fit into any pond it’s installed in. The kit is extensive, with long air tubes, dual air stones and multiple connectors and valves. Unlike other machines and mechanical devices, the Tetra Air Pump doesn’t draw a lot of energy and can function without making loud noises that annoy you or your neighbors. In fact, the pump is so quiet after installation you won’t even know it’s there!

How To Setup

Setting up your Tetra Air Pump is simple and straightforward. You’ll first want to connect the air tube to your pump. Next, you will need to install the T-Valves, Y-Valves or check valves. Afterwards you will have to connect the tubes to the air stones, equipment or ornaments. Finally, you will plug in the pump itself.

The good news about this air pump is that it doesn’t use a bunch of power. Most models require no more than five to eight watts. There are a few issues that people have run into that are simple to resolve. For instance, if the pump is not making bubbles, you will need to check the unit and valves to make sure everything is connected.